![]() ![]() ![]() If it returns EFI64 then it is 圆4 EFI firmware. If the command returns EFI32 then it is IA32 (32-bit) EFI firmware. $ ioreg -l -p IODeviceTree | grep firmware-abi To find out the arch of the EFI firmware in a Mac, type the following into the Mac OS X terminal: All Macs capable of running Mac OS X Snow Leopard 64-bit Kernel have 圆4 EFI 1.x firmware. Pre-2008 Macs mostly have IA32 EFI firmware while >=2008 Macs have mostly 圆4 EFI. If the file does not exist, then you have not booted in UEFI mode. It will return 64 for a 64-bit (圆4) UEFI or 32 for a 32-bit (IA32) UEFI. On distributions running Linux kernel 4.0 or newer, the UEFI firmware bitness can be found via the sysfs interface. The firmware bitness can be checked from a booted operating system. For example, GRUB when installed with the i386-efi target. Note: Systems with IA32 UEFI require using a boot loader that supports mixed mode booting. Therefore the EFI application must be compiled for that specific firmware processor bitness/architecture. The only known devices that use IA32 (32-bit) UEFI are older (pre 2008) Apple Macs, Intel Atom System-on-Chip systems (as on 2 November 2013) and some older Intel server boards that are known to operate on Intel EFI 1.10 firmware.Īn 圆4 UEFI firmware does not include support for launching 32-bit EFI applications (unlike x86_64 Linux and Windows versions which include such support). The vast majority of x86_64 systems, including recent Apple Macs, use 圆4 (64-bit) UEFI firmware. a memory testing or recovery tool), should be an EFI application corresponding to the UEFI firmware bitness/architecture. Under UEFI, every program whether it is an OS loader or a utility (e.g. The latest UEFI specification can be found at. Unless stated explicitly, these instructions are general and some of them may not work or may be different in Apple Macs. This kind of firmware does not fall under any one (U)EFI specification and therefore is not a standard UEFI firmware. Apple's EFI implementation is neither an EFI 1.x version nor UEFI 2.x version but mixes up both.Unless specified as EFI 1.x, EFI and UEFI terms are used interchangeably to denote UEFI 2.x firmware.Later, a group of companies called the UEFI Forum took over its development, which renamed it as Unified EFI starting with version 2.0.UEFI started as Intel's EFI in versions 1.x. ![]() Consider using legacy BIOS booting for such systems if you encounter unsolvable issues. Note: Early vendor UEFI implementations may carry more bugs than their BIOS counterparts. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |